A few minutes ago, I don’t even know what a Subaru Justy was. But now I can tell you that it’s a small, light hatchback and would be a pretty great recipient to have the innards of a 4.6L Mustang Cobra stuffed into it. Wait…what?
Thanks to Robert for commenting on the last post and adding a link to this project. The Justang was built by Circuit Motorsports.
Want to read about more projects like this? Try One Very Swift Lemon, the V8 tube frame Pontiac Firefly or the Chevy Lumina/Pontiac G6
It’s been almost a year since we caught up with the Impossible Fabrications / Nulon EG Civic crossed with an S15 Silvia.
The good news is, this little beast is now considered complete as far as stage one goes, and has been tearing up the streets and the track, turning rear tyres to dust. Now the team are looking to screw more power into this formerlly unasumming hatch, and I can’t wait to see how that goes! Don’t forget to check out the video exposé by Motive DVD at the bottom of the post.
Click here for the Nulon Civic / S15 build index.
Continue reading “EG Civic / S15 Silvia – Stage 1 Complete”
Here’s one of my oldest drafts, it’s been gathering dust for many, many years. I pretty much convinced myself I’d never feature it, because the thread stopped receiving updates a long time ago. But I have a desire to purge all of my draft posts, and well, this one is just crazy enough to warrant a feature in it’s unfinished state. If anyone out there knows what happened to this car, if it was ever completed, please let me know! The car starts out as an Alfa 147 Cup Car, it was then stripped down and fitted with GTR underpinnings, before heading to an unknown fate.
Thanks to Jamel for submitting. Click here for more RB26 builds. Click here for more Alfa Romeo builds.
We’re already up to Part 5 of the Impossible Fabrications / Nulon EG Civic build. In this installment we start at the back of the car to see the rear suspension framework finalised, and an alloy fuel tank fabricated. Then we work our way along the tailshaft and custom transmission tunnel, before heading to the front of the car where the bay is resprayed and the engine re-fitted. It’s almost time for SR20DETÂ RWD Civic burnouts!
Click here for the Nulon Civic / S15 build index.
Continue reading “EG Civic / S15 Silvia – Buttoning things up”
The guys at Impossible Fabrications are absolutely rocketing along with the Nulon EG Civic build, I can barely keep up! In part 3, we saw the SR20DET inserted into the engine bay, using the S15 front suspension, crossmember and strut towers. Now it’s the rear of the car getting some very similar attention…
Click here for the Nulon Civic / S15 build index.
Continue reading “EG Civic / S15 Silvia – Rear suspension & driveline”
Part 3 of the Nulon / Impossible Fabrications EG Civic is already here! In this update, we see the S15 SR20DET engine and gearbox find their way home. Of course they were always going to fit perfectly, because this particular little Honda already has a full S15 front end, which we saw installed in Part 2.
Click here for the Nulon Civic / S15 build index.
Continue reading “EG Civic / S15 Silvia – Engine installed!”
Here is Part 2 of the EG Civic / S15 Silvia build, which concentrates on the team at Impossible Fabrications ripping out the standard engine and front end, to replace it with the underpinnings from the S15. This is turning out to be almost factory looking! Read on…
Click here for Part 1. Impossible Fabricaions / Nulon Australia.
Continue reading “EG Civic / S15 Silvia – Front Suspension”
Not long ago I posted a link on the Facebook page about this very interesting project from Sydney, Australia. I’ve since been asked by the owner, Christopher, if I would like to re-post the progress of the build on Build-Threads.com, to which I happily obliged. So here is part 1, which gives you a nice rundown on the project including an introduction to the project car and it’s donor. I’m very excited to see this project take shape, and I’d like to thank Nulon and Impossible Fabrication for giving me the opportunity to share it with you. Part 2 is already up, you’ll find the link at the bottom of this post.
Please check out Impossible Fabricaions and Nulon Australia.
