Project 510: FMIC + more (pt 4)

Let’s wrap this up, shall we? This fourth (and final!) segment will be all of the satisfying stuff. Now that all of the fabrication and test-fitting had been completed, I could move on to the fun stuff; making everything pretty and bolting it all back onto the car.

Part 1  –  Part 2  –  Part 3

Continue reading “Project 510: FMIC + more (pt 4)”

Project 510: FMIC + more (pt 3)

Part 3, here we go. To quickly re-cap, Part 1 was all about relocating the alternator with custom mounts, and Part 2 saw the intercooler and radiator bolted into place, and the intercooler piping tacked together. Now we’re getting down to the finer details.

Continue reading “Project 510: FMIC + more (pt 3)”

Project 510: FMIC + more (pt 2)

When we left off from the last update, I had successfully relocated the alternator and had the crank pulley machined down to one single groove, with a smaller belt fitted to suit. I was now ready to get back to the original task at hand; fitting the intercooler, radiator, and modifying the intake manifold.

Continue reading “Project 510: FMIC + more (pt 2)”

Project 510: FMIC + more (pt 1)

Well, where do I start? This is going to be easily the biggest update I’ve ever posted about the car, as I’ve just completed 8 months of on/off work under the bonnet in my spare time. During those 8 months I also sadly lost two of my beloved grandparents, went a holiday to Europe, and have attended 4 weddings, so things may have taken a little bit longer than usual.

Continue reading “Project 510: FMIC + more (pt 1)”