1952 GMC 9700 Truck

A home-built ex fire truck, now fitted to a bagged S10 frame, powered by a 7.3L IDI International turbo diesel…this truck is cool as hell! Not to mention it gets driven hard over long distances. I’m not sure who submitted this, as it’s been sitting in my drafts for a while, but about 20 pages into the thread I noticed my buddy Dave from Stance Is Everything had featured this very truck on his site. I highly recommend heading over to his post to check out not only the fantastic photos he snapped (some which are featured below), but also the story he put together which sums up the build way better than I can.

Continue reading “1952 GMC 9700 Truck”

Ford Falcon XR6 Turbo Ute – Part 5

Now we’re up to Part 5, the fabrication is nearing completion and we’re starting to see some fresh colour being laid down.

Previous instalments: Part 1 - Part 2 - Part 3 – Part 4

Continue reading “Ford Falcon XR6 Turbo Ute – Part 5”

Ford Falcon XR6 Turbo Ute – Part 4

Part 4 is here! In this update we see the cooling system take shape, along with intercooler piping and some interior upgrades.

Previous instalments: Part 1Part 2Part 3

Continue reading “Ford Falcon XR6 Turbo Ute – Part 4”

Ford Falcon XR6 Turbo Ute – Part 3

In the third instalment of the Nulon / Impossible Fabrications XR6 Turbo Ute, we see the front end converted to a tube frame setup, and a special one-off exhaust fabricated all the way from manifold to side-pipe.

Previous posts: Part 1Part 2

Continue reading “Ford Falcon XR6 Turbo Ute – Part 3”

Ford Falcon XR6 Turbo Ute – Part 2

In Part 2 of the Nulon / Impossible Fabrications XR6 Turbo ute, we see the car rolling around on it’s new 300ZX rear end, allowing it to have it’s intricate roll cage fabricated.

Click here for Part 1.

Continue reading “Ford Falcon XR6 Turbo Ute – Part 2”

Ford Falcon XR6 Turbo Ute – Part 1

The folks at Nulon and Impossible Fabrications are back with another hybrid creation. If you remember the EG Civic they built a while back, you’ll know they’re no stranger to an angle grinder and welder. That little Civic is now both rear wheel drive and turbo, or basically what you could call an S15 200sx / Silvia in a Civic body shell. Grub from Impossible contacted me to let me know they’re undertaking a new project. This time they’re doing us Aussies proud by not only starting with a local car – a Ford Falcon – but also choosing a UTE! You’ll have to continue below to find out their plans for this hauler…

Continue reading “Ford Falcon XR6 Turbo Ute – Part 1”

Hot Rod Archeology – 1955 Ford pickup

More story-time than all-out build, this post revolves around a keen youngster from Norway who lives in US and has a deep love of hot rods and customs. A stolen daily driver leads him to Craigslist for a replacement, where he finds an ad for what looks like a well-worn farm truck, but turns out to be much more. A closer inspection reveals custom body-work by George Barris and pin-striping and murals by Von Dutch. The sale and handover is not a simple pick up, hand shake and “see ya later”. Both buyer and seller start a blooming friendship that opens up a treasure trove of history thanks to the original owner’s penchant for taking and keeping old photos. The new owner continues to keep in contact to ask questions and pick up parts, and even just cruise around and talk cars. Apart from the car itself, the thread is great just for the old photos from the custom car scene of yesteryear and the series of coincidences that unfold.

Continue reading “Hot Rod Archeology – 1955 Ford pickup”

MK1 VW Caddy R32 4-Motion

Things have been quieter than usual around here and on Facebook/Twitter lately, and while I do apologise for that, I promise I have a good reason! My wife and I welcomed our first child into the world just over a week ago, so things have been understandably busy at home. But believe me when I say that in the back of my mind I was always thinking about the site and how you guys would be hanging for a new build! So, here we go. This car has been on my radar for a while, a great example of a home-built concoction, all fabricated by the owner, mixing a MK1 Volkswagen Caddy body with a MKIV Bora 4-motion V6 AWD driveline, and plenty of welding to stick it all together.

Click here for more MK1 builds.

Continue reading “MK1 VW Caddy R32 4-Motion”

Roadster Shop C-10 [video build]

One company I’ve loved following online for the past few years is Roadster Shop. In fact, I’ve featured a couple of their builds before, which you can view by clicking here. While cruising around the Pro Touring forums, which I like to do regularly, I noticed they were undertaking yet another new build. This time, they’re teaming up with Craftsman Tools and putting together a really nice Chevy C-10 pickup, all documented via some slick videos that detail each stage of the process. Apart from the videos there are also high quality images in the thread, which you’ll find at the bottom of the post.

Continue reading “Roadster Shop C-10 “

Bagged Porsche Dually

Not the kind of title you’d see every day, right? After overwhelming feedback on the Facebook page, I bring you this very unique piece of machinery. What was originally a Porsche 911 is now merely a Stuttgart shell sitting atop a Chevy pickup dually chassis, with a 454 V8 and 4-speed, riding on air. The build isn’t finished, the thread goes cold after just over 2 pages. If anyone knows what ever happened to this thing, please let me know!

Thanks to Samuli for submitting. Click here for more Porsche builds.

Continue reading “Bagged Porsche Dually”